Your IP : 18.118.227.141
| Current Path : /proc/22003/root/bin/ |
|
|
| Current File : //proc/22003/root/bin/rescan-scsi-bus.sh |
#!/bin/bash
# Skript to rescan SCSI bus, using the
# scsi add-single-device mechanism
# (c) 1998--2010 Kurt Garloff <kurt@garloff.de>, GNU GPL v2 or v3
# (c) 2006--2013 Hannes Reinecke, GNU GPL v2 or later
# $Id: rescan-scsi-bus.sh,v 1.57 2012/03/31 14:08:48 garloff Exp $
SCAN_WILD_CARD=4294967295
setcolor ()
{
red="\e[0;31m"
green="\e[0;32m"
yellow="\e[0;33m"
bold="\e[0;1m"
norm="\e[0;0m"
}
unsetcolor ()
{
red=""; green=""
yellow=""; norm=""
}
echo_debug()
{
if [ $debug -eq 1 ] ; then
echo "$1"
fi
}
# Output some text and return cursor to previous position
# (only works for simple strings)
# Stores length of string in LN and returns it
print_and_scroll_back ()
{
STRG="$1"
LN=${#STRG}
BK=""
declare -i cntr=0
while test $cntr -lt $LN; do BK="$BK\e[D"; let cntr+=1; done
echo -en "$STRG$BK"
return $LN
}
# Overwrite a text of length $1 (fallback to $LN) with whitespace
white_out ()
{
BK=""; WH=""
if test -n "$1"; then LN=$1; fi
declare -i cntr=0
while test $cntr -lt $LN; do BK="$BK\e[D"; WH="$WH "; let cntr+=1; done
echo -en "$WH$BK"
}
# Return hosts. sysfs must be mounted
findhosts_26 ()
{
hosts=`find /sys/class/scsi_host/host* -maxdepth 4 -type d -o -type l 2> /dev/null | awk -F'/' '{print $5}' | sed -e 's~host~~' | sort -nu`
scsi_host_data=`echo "$hosts" | sed -e 's~^~/sys/class/scsi_host/host~'`
for hostdir in $scsi_host_data; do
hostno=${hostdir#/sys/class/scsi_host/host}
if [ -f $hostdir/isp_name ] ; then
hostname="qla2xxx"
elif [ -f $hostdir/lpfc_drvr_version ] ; then
hostname="lpfc"
else
hostname=`cat $hostdir/proc_name`
fi
#hosts="$hosts $hostno"
echo_debug "Host adapter $hostno ($hostname) found."
done
if [ -z "$hosts" ] ; then
echo "No SCSI host adapters found in sysfs"
exit 1;
fi
# Not necessary just use double quotes around variable to preserve new lines
#hosts=`echo $hosts | tr ' ' '\n'`
}
# Return hosts. /proc/scsi/HOSTADAPTER/? must exist
findhosts ()
{
hosts=
for driverdir in /proc/scsi/*; do
driver=${driverdir#/proc/scsi/}
if test $driver = scsi -o $driver = sg -o $driver = dummy -o $driver = device_info; then continue; fi
for hostdir in $driverdir/*; do
name=${hostdir#/proc/scsi/*/}
if test $name = add_map -o $name = map -o $name = mod_parm; then continue; fi
num=$name
driverinfo=$driver
if test -r $hostdir/status; then
num=$(printf '%d\n' `sed -n 's/SCSI host number://p' $hostdir/status`)
driverinfo="$driver:$name"
fi
hosts="$hosts $num"
echo "Host adapter $num ($driverinfo) found."
done
done
}
printtype ()
{
local type=$1
case "$type" in
0) echo "Direct-Access " ;;
1) echo "Sequential-Access" ;;
2) echo "Printer " ;;
3) echo "Processor " ;;
4) echo "WORM " ;;
5) echo "CD-ROM " ;;
6) echo "Scanner " ;;
7) echo "Optical Device " ;;
8) echo "Medium Changer " ;;
9) echo "Communications " ;;
10) echo "Unknown " ;;
11) echo "Unknown " ;;
12) echo "RAID " ;;
13) echo "Enclosure " ;;
14) echo "Direct-Access-RBC" ;;
*) echo "Unknown " ;;
esac
}
print02i()
{
if [ "$1" = "*" ] ; then
echo "00"
else
printf "%02i" "$1"
fi
}
# Get /proc/scsi/scsi info for device $host:$channel:$id:$lun
# Optional parameter: Number of lines after first (default = 2),
# result in SCSISTR, return code 1 means empty.
procscsiscsi ()
{
if test -z "$1"; then LN=2; else LN=$1; fi
CHANNEL=`print02i "$channel"`
ID=`print02i "$id"`
LUN=`print02i "$lun"`
if [ -d /sys/class/scsi_device ]; then
SCSIPATH="/sys/class/scsi_device/${host}:${channel}:${id}:${lun}"
if [ -d "$SCSIPATH" ] ; then
SCSISTR="Host: scsi${host} Channel: $CHANNEL Id: $ID Lun: $LUN"
if [ "$LN" -gt 0 ] ; then
IVEND=$(cat ${SCSIPATH}/device/vendor)
IPROD=$(cat ${SCSIPATH}/device/model)
IPREV=$(cat ${SCSIPATH}/device/rev)
SCSIDEV=$(printf ' Vendor: %-08s Model: %-16s Rev: %-4s' "$IVEND" "$IPROD" "$IPREV")
SCSISTR="$SCSISTR
$SCSIDEV"
fi
if [ "$LN" -gt 1 ] ; then
ILVL=$(cat ${SCSIPATH}/device/scsi_level)
type=$(cat ${SCSIPATH}/device/type)
ITYPE=$(printtype $type)
SCSITMP=$(printf ' Type: %-16s ANSI SCSI revision: %02d' "$ITYPE" "$((ILVL - 1))")
SCSISTR="$SCSISTR
$SCSITMP"
fi
else
return 1
fi
else
grepstr="scsi$host Channel: $CHANNEL Id: $ID Lun: $LUN"
SCSISTR=`cat /proc/scsi/scsi | grep -A$LN -e"$grepstr"`
fi
if test -z "$SCSISTR"; then return 1; else return 0; fi
}
# Find sg device with 2.6 sysfs support
sgdevice26 ()
{
if test -e /sys/class/scsi_device/$host\:$channel\:$id\:$lun/device/generic; then
SGDEV=`readlink /sys/class/scsi_device/$host\:$channel\:$id\:$lun/device/generic`
SGDEV=`basename $SGDEV`
else
for SGDEV in /sys/class/scsi_generic/sg*; do
DEV=`readlink $SGDEV/device`
if test "${DEV##*/}" = "$host:$channel:$id:$lun"; then
SGDEV=`basename $SGDEV`; return
fi
done
SGDEV=""
fi
}
# Find sg device with 2.4 report-devs extensions
sgdevice24 ()
{
if procscsiscsi 3; then
SGDEV=`echo "$SCSISTR" | grep 'Attached drivers:' | sed 's/^ *Attached drivers: \(sg[0-9]*\).*/\1/'`
fi
}
# Find sg device that belongs to SCSI device $host $channel $id $lun
# and return in SGDEV
sgdevice ()
{
SGDEV=
if test -d /sys/class/scsi_device; then
sgdevice26
else
DRV=`grep 'Attached drivers:' /proc/scsi/scsi 2>/dev/null`
repdevstat=$((1-$?))
if [ $repdevstat = 0 ]; then
echo "scsi report-devs 1" >/proc/scsi/scsi
DRV=`grep 'Attached drivers:' /proc/scsi/scsi 2>/dev/null`
if [ $? = 1 ]; then return; fi
fi
if ! `echo $DRV | grep 'drivers: sg' >/dev/null`; then
modprobe sg
fi
sgdevice24
if [ $repdevstat = 0 ]; then
echo "scsi report-devs 0" >/proc/scsi/scsi
fi
fi
}
# Test if SCSI device is still responding to commands
# Return values:
# 0 device is present
# 1 device has changed
# 2 device has been removed
testonline ()
{
: testonline
RC=0
if test ! -x /usr/bin/sg_turs; then return 0; fi
sgdevice
if test -z "$SGDEV"; then return 0; fi
sg_turs /dev/$SGDEV &>/dev/null
RC=$?
# Handle in progress of becoming ready and unit attention -- wait at max 11s
declare -i ctr=0
if test $RC = 2 -o $RC = 6; then
RMB=`sg_inq /dev/$SGDEV | grep 'RMB=' | sed 's/^.*RMB=\(.\).*$/\1/'`
print_and_scroll_back "$host:$channel:$id:$lun $SGDEV ($RMB) "
fi
while test $RC = 2 -o $RC = 6 && test $ctr -le 8; do
if test $RC = 2 -a "$RMB" != "1"; then echo -n "."; let LN+=1; sleep 1
else usleep 20000; fi
let ctr+=1
sg_turs /dev/$SGDEV &>/dev/null
RC=$?
done
if test $ctr != 0; then white_out; fi
# echo -e "\e[A\e[A\e[A${yellow}Test existence of $SGDEV = $RC ${norm} \n\n\n"
if test $RC = 1; then return $RC; fi
# Reset RC (might be !=0 for passive paths)
RC=0
# OK, device online, compare INQUIRY string
INQ=`sg_inq $sg_len_arg /dev/$SGDEV 2>/dev/null`
IVEND=`echo "$INQ" | grep 'Vendor identification:' | sed 's/^[^:]*: \(.*\)$/\1/'`
IPROD=`echo "$INQ" | grep 'Product identification:' | sed 's/^[^:]*: \(.*\)$/\1/'`
IPREV=`echo "$INQ" | grep 'Product revision level:' | sed 's/^[^:]*: \(.*\)$/\1/'`
STR=`printf " Vendor: %-08s Model: %-16s Rev: %-4s" "$IVEND" "$IPROD" "$IPREV"`
IPTYPE=`echo "$INQ" | sed -n 's/.* Device_type=\([0-9]*\) .*/\1/p'`
IPQUAL=`echo "$INQ" | sed -n 's/ *PQual=\([0-9]*\) Device.*/\1/p'`
if [ "$IPQUAL" != 0 ] ; then
echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}LU not available (PQual $IPQUAL)${norm} \n\n\n"
return 2
fi
TYPE=$(printtype $IPTYPE)
if ! procscsiscsi ; then
echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV removed.\n\n\n"
return 2
fi
TMPSTR=`echo "$SCSISTR" | grep 'Vendor:'`
if test $ignore_rev -eq 0 ; then
if [ "$TMPSTR" != "$STR" ]; then
echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${SCSISTR#* } \nto: $STR ${norm} \n\n\n"
return 1
fi
else
# Ignore disk revision change
local old_str_no_rev=`echo "$TMPSTR" | sed -e 's/.\{4\}$//'`
local new_str_no_rev=`echo "$STR" | sed -e 's/.\{4\}$//'`
if [ "$old_str_no_rev" != "$new_str_no_rev" ]; then
echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${SCSISTR#* } \nto: $STR ${norm} \n\n\n"
return 1
fi
fi
TMPSTR=`echo "$SCSISTR" | sed -n 's/.*Type: *\(.*\) *ANSI.*/\1/p'`
NTMPSTR="$(sed -e 's/[[:space:]]*$//' -e 's/^[[:space:]]*//' <<<${TMPSTR})"
NTYPE="$(sed -e 's/[[:space:]]*$//' -e 's/^[[:space:]]*//' <<<${TYPE})"
if [ "$NTMPSTR" != "$NTYPE" ] ; then
echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${TMPSTR} \nto: $TYPE ${norm} \n\n\n"
return 1
fi
return $RC
}
# Test if SCSI device $host $channen $id $lun exists
# Outputs description from /proc/scsi/scsi (unless arg passed)
# Returns SCSISTR (empty if no dev)
testexist ()
{
: testexist
SCSISTR=
if procscsiscsi && test -z "$1"; then
echo "$SCSISTR" | head -n1
echo "$SCSISTR" | tail -n2 | pr -o4 -l1
fi
}
# Returns the list of existing channels per host
chanlist ()
{
local hcil
local cil
local chan
local tmpchan
for dev in /sys/class/scsi_device/${host}:* ; do
[ -d $dev ] || continue;
hcil=${dev##*/}
cil=${hcil#*:}
chan=${cil%%:*}
for tmpchan in $channelsearch ; do
if test "$chan" -eq $tmpchan ; then
chan=
fi
done
if test -n "$chan" ; then
channelsearch="$channelsearch $chan"
fi
done
if test -z "$channelsearch"; then channelsearch="0"; fi
}
# Returns the list of existing targets per host
idlist ()
{
local hcil
local target
local tmpid
local newid
idsearch=$(ls /sys/class/scsi_device/ | sed -n "s/${host}:${channel}:\([0-9]*\):[0-9]*/\1/p" | uniq)
echo "${channel} - -" > /sys/class/scsi_host/host${host}/scan
# Rescan to check if we found new targets
newsearch=$(ls /sys/class/scsi_device/ | sed -n "s/${host}:${channel}:\([0-9]*\):[0-9]*/\1/p" | uniq)
for id in $newsearch ; do
newid=$id
for tmpid in $idsearch ; do
if test $id -eq $tmpid ; then
newid=
break
fi
done
if test -n "$newid" ; then
id=$newid
for dev in /sys/class/scsi_device/${host}:${channel}:${newid}:* ; do
[ -d $dev ] || continue;
hcil=${dev##*/}
lun=${hcil##*:}
printf "\r${green}NEW: $norm"
testexist
if test "$SCSISTR" ; then
incrfound "$hcil"
fi
done
fi
done
}
# Returns the list of existing LUNs from device $host $channel $id $lun
# and returns list to stdout
getluns()
{
sgdevice
if test -z "$SGDEV"; then return 1; fi
if test ! -x /usr/bin/sg_luns; then echo 0; return 1; fi
LLUN=`sg_luns /dev/$SGDEV 2>/dev/null | sed -n 's/ \(.*\)/\1/p'`
# Added -z $LLUN condition because $? gets the RC from sed, not sg_luns
if test $? != 0 -o -z "$LLUN"; then echo 0; return 1; fi
for lun in $LLUN ; do
# Swap LUN number
l0=$(printf '%u' 0x$lun)
l1=$(( ($l0 >> 48) & 0xffff ))
l2=$(( ($l0 >> 32) & 0xffff ))
l3=$(( ($l0 >> 16) & 0xffff ))
l4=$(( $l0 & 0xffff ))
l0=$(( ( ( ($l4 * 0xffff) + $l3 ) * 0xffff + $l2 ) * 0xffff + $l1 ))
printf "%u\n" $l0
done
return 0
}
# Wait for udev to settle (create device nodes etc.)
udevadm_settle()
{
if test -x /sbin/udevadm; then
print_and_scroll_back " Calling udevadm settle (can take a while) "
/sbin/udevadm settle
white_out
elif test -x /sbin/udevsettle; then
print_and_scroll_back " Calling udevsettle (can take a while) "
/sbin/udevsettle
white_out
else
usleep 20000
fi
}
# Perform scan on a single lun $host $channel $id $lun
dolunscan()
{
local remappedlun0=
SCSISTR=
devnr="$host $channel $id $lun"
echo -e " Scanning for device $devnr ... "
printf "${yellow}OLD: $norm"
testexist
# Device exists: Test whether it's still online
# (testonline returns 2 if it's gone and 1 if it has changed)
if test "$SCSISTR" ; then
testonline
RC=$?
# Well known lun transition case. Only for Direct-Access devs (type 0)
# If block directory exists && and PQUAL != 0, we unmapped lun0 and just have a well-known lun
# If block directory doesn't exist && PQUAL == 0, we mapped a real lun0
if test $lun -eq 0 -a $IPTYPE -eq 0 ; then
if test $RC = 2 ; then
if test -e /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device; then
if test -d /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/block ; then
remappedlun0=2 # Transition from real lun 0 to well-known
else
RC=0 # Set this so the system leaves the existing well known lun alone. This is a lun 0 with no block directory
fi
fi
elif test $RC = 0 -a $IPTYPE -eq 0; then
if test -e /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device; then
if test ! -d /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/block ; then
remappedlun0=1 # Transition from well-known to real lun 0
fi
fi
fi
fi
fi
# Special case: lun 0 just got added (for reportlunscan),
# so make sure we correctly treat it as new
if test "$lun" = "0" -a "$1" = "1" -a -z "$remappedlun0"; then
SCSISTR=""
printf "\r\e[A\e[A\e[A"
fi
: f $remove s $SCSISTR
if test "$remove" -a "$SCSISTR" -o "$remappedlun0" = "1"; then
if test $RC != 0 -o ! -z "$forceremove" -o -n "$remappedlun0"; then
if test "$remappedlun0" != "1" ; then
echo -en "\r\e[A\e[A\e[A${red}REM: "
echo "$SCSISTR" | head -n1
echo -e "${norm}\e[B\e[B"
fi
if test -e /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device; then
# have to preemptively do this so we can figure out the mpath device
# Don't do this if we're deleting a well known lun to replace it
if test "$remappedlun0" != "1" ; then
incrrmvd "$host:$channel:$id:$lun"
fi
echo 1 > /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/delete
usleep 20000
else
echo "scsi remove-single-device $devnr" > /proc/scsi/scsi
if test $RC -eq 1 -o $lun -eq 0 ; then
# Try readding, should fail if device is gone
echo "scsi add-single-device $devnr" > /proc/scsi/scsi
fi
fi
fi
if test $RC = 0 -o "$forcerescan" ; then
if test -e /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device; then
echo 1 > /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/rescan
fi
fi
printf "\r\e[A\e[A\e[A${yellow}OLD: $norm"
testexist
if test -z "$SCSISTR" -a $RC != 1 -a "$remappedlun0" != "1"; then
printf "\r${red}DEL: $norm\r\n\n"
# In the event we're replacing with a well known node, we need to let it continue, to create the replacement node
test "$remappedlun0" != "2" && return 1
fi
fi
if test -z "$SCSISTR" -o -n "$remappedlun0"; then
if test "$remappedlun0" != "2" ; then
# Device does not exist, try to add
printf "\r${green}NEW: $norm"
fi
if test -e /sys/class/scsi_host/host${host}/scan; then
echo "$channel $id $lun" > /sys/class/scsi_host/host${host}/scan 2> /dev/null
else
echo "scsi add-single-device $devnr" > /proc/scsi/scsi
fi
testexist
if test -z "$SCSISTR"; then
# Device not present
printf "\r\e[A";
# Optimization: if lun==0, stop here (only if in non-remove mode)
if test $lun = 0 -a -z "$remove" -a $optscan = 1; then
break;
fi
else
if test "$remappedlun0" != "2" ; then
incrfound "$host:$channel:$id:$lun"
fi
fi
fi
}
# Perform report lun scan on $host $channel $id using REPORT_LUNS
doreportlun()
{
lun=0
SCSISTR=
devnr="$host $channel $id $lun"
echo -en " Scanning for device $devnr ...\r"
lun0added=
#printf "${yellow}OLD: $norm"
# Phase one: If LUN0 does not exist, try to add
testexist -q
if test -z "$SCSISTR"; then
# Device does not exist, try to add
#printf "\r${green}NEW: $norm"
if test -e /sys/class/scsi_host/host${host}/scan; then
echo "$channel $id $lun" > /sys/class/scsi_host/host${host}/scan 2> /dev/null
udevadm_settle
else
echo "scsi add-single-device $devnr" > /proc/scsi/scsi
fi
testexist -q
if test -n "$SCSISTR"; then
lun0added=1
#testonline
else
# Device not present
# return
# Find alternative LUN to send getluns to
for dev in /sys/class/scsi_device/${host}:${channel}:${id}:*; do
[ -d "$dev" ] || continue
lun=${dev##*:}
break
done
fi
fi
targetluns=`getluns`
REPLUNSTAT=$?
lunremove=
#echo "getluns reports " $targetluns
olddev=`find /sys/class/scsi_device/ -name $host:$channel:$id:* 2>/dev/null`
oldluns=`echo "$olddev" | awk -F'/' '{print $5}' | awk -F':' '{print $4}'`
oldtargets="$targetluns"
# OK -- if we don't have a LUN to send a REPORT_LUNS to, we could
# fall back to wildcard scanning. Same thing if the device does not
# support REPORT_LUNS
# TODO: We might be better off to ALWAYS use wildcard scanning if
# it works
if test "$REPLUNSTAT" = "1"; then
if test -e /sys/class/scsi_host/host${host}/scan; then
echo "$channel $id -" > /sys/class/scsi_host/host${host}/scan 2> /dev/null
udevadm_settle
else
echo "scsi add-single-device $host $channel $id $SCAN_WILD_CARD" > /proc/scsi/scsi
fi
targetluns=`find /sys/class/scsi_device/ -name $host:$channel:$id:* 2>/dev/null | awk -F'/' '{print $5}' | awk -F':' '{print $4}' | sort -n`
let found+=`echo "$targetluns" | wc -l`
let found-=`echo "$olddev" | wc -l`
fi
if test -z "$targetluns"; then targetluns="$oldtargets"; fi
# Check existing luns
for dev in $olddev; do
[ -d "$dev" ] || continue
lun=${dev##*:}
newsearch=
inlist=
# OK, is existing $lun (still) in reported list
for tmplun in $targetluns; do
if test $tmplun -eq $lun ; then
inlist=1
dolunscan $lun0added
else
newsearch="$newsearch $tmplun"
fi
done
# OK, we have now done a lunscan on $lun and
# $newsearch is the old $targetluns without $lun
if [ -z "$inlist" ]; then
# Stale lun
lunremove="$lunremove $lun"
fi
# $lun removed from $lunsearch (echo for whitespace cleanup)
targetluns=`echo $newsearch`
done
# Add new ones and check stale ones
for lun in $targetluns $lunremove; do
dolunscan $lun0added
done
}
# Perform search (scan $host)
dosearch ()
{
if test -z "$channelsearch" ; then
chanlist
fi
for channel in $channelsearch; do
if test -z "$idsearch" ; then
idlist
fi
for id in $idsearch; do
if test -z "$lunsearch" ; then
doreportlun
else
for lun in $lunsearch; do
dolunscan
done
fi
done
done
}
expandlist ()
{
list=$1
result=""
first=${list%%,*}
rest=${list#*,}
while test ! -z "$first"; do
beg=${first%%-*};
if test "$beg" = "$first"; then
result="$result $beg";
else
end=${first#*-}
result="$result `seq $beg $end`"
fi
test "$rest" = "$first" && rest=""
first=${rest%%,*}
rest=${rest#*,}
done
echo $result
}
searchexisting()
{
local tmpch;
local tmpid
local match=0
local targets=`ls -d /sys/class/scsi_device/$host:* 2> /dev/null | egrep -o $host:[0-9]+:[0-9]+ | sort | uniq`
# Nothing came back on this host, so we should skip it
test -z "$targets" && return
local target=;
for target in $targets ; do
channel=`echo $target | cut -d":" -f2`
id=`echo $target | cut -d":" -f 3`
if [ -n "$channelsearch" ] ; then
for tmpch in $channelsearch ; do
test $tmpch -eq $channel && match=1
done
else
match=1
fi
test $match -eq 0 && continue
match=0
if [ $filter_ids -eq 1 ] ; then
for tmpid in $idsearch ; do
if [ $tmpid -eq $id ] ; then
match=1
fi
done
else
match=1
fi
test $match -eq 0 && continue
if [ -z "$lunsearch" ] ; then
doreportlun
else
for lun in $lunsearch ; do
dolunscan
done
fi
done
}
# Go through all of the existing devices and figure out any that have been remapped
findremapped()
{
local hctl=;
local devs=`ls /sys/class/scsi_device/`
local sddev=
local id_serial=
local id_serial_old=
local sysfs_devpath=
mpaths=""
local tmpfile="/tmp/rescan-scsi-bus-`date +s`"
test -f $tmpfile && rm $tmpfile
# Get all of the ID_SERIAL attributes, after finding their sd node
for hctl in $devs ; do
if [ -d /sys/class/scsi_device/$hctl/device/block ] ; then
sddev=`ls /sys/class/scsi_device/$hctl/device/block`
id_serial_old=`udevadm info -q all -n $sddev | grep "ID_SERIAL=" | cut -d"=" -f2`
[ -z "$id_serial_old" ] && id_serial_old="none"
echo "$hctl $sddev $id_serial_old" >> $tmpfile
fi
done
# Trigger udev to update the info
echo -n "Triggering udev to update device information... "
/sbin/udevadm trigger
udevadm_settle &>/dev/null
echo "Done"
# See what changed and reload the respective multipath device if applicable
while read hctl sddev id_serial_old ; do
id_serial=`udevadm info -q all -n $sddev | grep "ID_SERIAL=" | cut -d"=" -f2`
[ -z "$id_serial" ] && id_serial="none"
if [ "$id_serial_old" != "$id_serial" ] ; then
if [ "$id_serial" = "1" ] ; then
continue # the lun was unmapped and is getting the blank scsi id (1)
fi
printf "${yellow}REMAPPED: $norm"
host=`echo $hctl | cut -d":" -f1`
channel=`echo $hctl | cut -d":" -f2`
id=`echo $hctl | cut -d":" -f3`
lun=`echo $hctl | cut -d":" -f4`
procscsiscsi
echo "$SCSISTR"
incrchgd "$hctl"
fi
done < $tmpfile
rm $tmpfile &>/dev/null
if test -n "$mp_enable" -a -n "$mpaths" ; then
echo "Updating multipath device mappings"
flushmpaths
$MULTIPATH | grep "create:" 2> /dev/null
fi
}
incrfound()
{
local hctl="$1"
if test -n "$hctl" ; then
let found+=1
FOUNDDEVS="$FOUNDDEVS\t[$hctl]\n"
else
return
fi
}
incrchgd()
{
local hctl="$1"
if test -n "$hctl" ; then
let updated+=1
CHGDEVS="$CHGDEVS\t[$hctl]\n"
else
return
fi
if test -n "$mp_enable" ; then
local sdev="`findsddev \"$hctl\"`"
if test -n "$sdev" ; then
findmultipath "$sdev"
fi
fi
}
incrrmvd()
{
local hctl="$1"
if test -n "$hctl" ; then
let rmvd+=1;
RMVDDEVS="$RMVDDEVS\t[$hctl]\n"
else
return
fi
if test -n "$mp_enable" ; then
local sdev="`findsddev \"$hctl\"`"
if test -n "$sdev" ; then
findmultipath "$sdev"
fi
fi
}
findsddev()
{
local hctl="$1"
local sddev=
if test ! -e /sys/class/scsi_device/$hctl/device/block ; then
return 1
fi
sddev=`ls /sys/class/scsi_device/$hctl/device/block`
echo $sddev
return 0
}
findmultipath()
{
local dev="$1"
local mp=
local mp2=
# Need a sdev, and executable multipath and dmsetup command here
if [ -z "$dev" ] || [ ! -x $DMSETUP ] ; then
return 1
fi
local maj_min=`cat /sys/block/$dev/dev`
for mp in $($DMSETUP ls --target=multipath | cut -f 1) ; do
if $($DMSETUP status $mp | grep -q " $maj_min ") ; then
for mp2 in $mpaths ; do
# mp device is already there, return
if [ "$mp2" = "$mp" ] ; then
return
fi
done
mpaths="$mpaths $mp"
return
fi
done
}
reloadmpaths()
{
local mpath
if [ ! -x $MULTIPATH ] ; then
echo "no -x multipath"
return
fi
if [ "$1" = "1" ] ; then
echo "Reloading all multipath devices"
$MULTIPATH -r &>/dev/null
return
fi
# Reload the multipath devices
for mpath in $mpaths ; do
echo "Reloading multipath device $mpath"
$MULTIPATH -r $mpath &>/dev/null
done
}
flushmpaths()
{
local mpath
# Mode: flush only failed
if test -n "$1" ; then
for mpath in $($DMSETUP ls --target=multipath | cut -f 1) ; do
num=$($DMSETUP status $mpath | awk 'BEGIN{RS=" ";active=0}/[0-9]+:[0-9]+/{dev=1}/A/{if (dev == 1) active++; dev=0} END{ print active }')
if [ $num -eq 0 ] ; then
echo -n "Flushing multipath device $mpath... "
$DMSETUP message $mpath 0 fail_if_no_path &>/dev/null
$MULTIPATH -f $mpath &>/dev/null
$DMSETUP status $mpath &>/dev/null
if test "$?" = "1" ; then
echo "Done"
else
echo "Fail"
fi
fi
done
return
fi
# Flush all the devs specified in $mpaths
for mpath in $mpaths ; do
echo -n "Flushing multipath device $mpath... "
$DMSETUP message $mpath 0 fail_if_no_path &>/dev/null
$MULTIPATH -f $mpath &>/dev/null
$DMSETUP status $mpath &>/dev/null
if test "$?" = "1" ; then
echo "Done"
else
echo "Fail"
fi
done
}
# Find resized luns
findresized()
{
local devs=`ls /sys/class/scsi_device/`
local size=
local new_size=
local sysfs_path=
local sddev=
for hctl in $devs ; do
sysfs_path="/sys/class/scsi_device/$hctl/device"
if [ -d "$sysfs_path/block" ] ; then
sddev=`ls $sysfs_path/block`
size=`cat $sysfs_path/block/$sddev/size`
echo 1 > $sysfs_path/rescan
new_size=`cat $sysfs_path/block/$sddev/size`
if [ "$size" != "$new_size" ] && [ "$size" != "0" ] && [ "$new_size" != "0" ] ; then
printf "${yellow}RESIZED: $norm"
host=`echo $hctl | cut -d":" -f1`
channel=`echo $hctl | cut -d":" -f2`
id=`echo $hctl | cut -d":" -f3`
lun=`echo $hctl | cut -d":" -f4`
procscsiscsi
echo "$SCSISTR"
incrchgd "$hctl"
fi
fi
done
if test -n "$mp_enable" -a -n "$mpaths" ; then
reloadmpaths
fi
}
FOUNDDEVS=""
CHGDEVS=""
RMVDDEVS=""
# main
if test @$1 = @--help -o @$1 = @-h -o @$1 = @-?; then
echo "Usage: rescan-scsi-bus.sh [options] [host [host ...]]"
echo "Options:"
echo " -a scan all targets, not just currently existing [default: disabled]"
echo " -d enable debug [default: 0]"
echo " -l activates scanning for LUNs 0--7 [default: 0]"
echo " -L NUM activates scanning for LUNs 0--NUM [default: 0]"
echo " -w scan for target device IDs 0--15 [default: 0--7]"
echo " -c enables scanning of channels 0 1 [default: 0 / all detected ones]"
echo " -m update multipath devices [default: disabled]"
echo " -r enables removing of devices [default: disabled]"
echo " -f flush failed multipath devices [default: disabled]"
echo " -i issue a FibreChannel LIP reset [default: disabled]"
echo " -u look for existing disks that have been remapped"
echo " -s look for resized disks and reload associated multipath devices, if applicable"
echo "--alltargets: same as -a"
echo "--remove: same as -r"
echo "--flush: same as -f"
echo "--issue-lip: same as -i"
echo "--wide: same as -w"
echo "--multipath: same as -m"
echo "--forceremove: Remove stale devices (DANGEROUS)"
echo "--forcerescan: Remove and readd existing devices (DANGEROUS)"
echo "--nooptscan: don't stop looking for LUNs if 0 is not found"
echo "--color: use coloured prefixes OLD/NEW/DEL"
echo "--hosts=LIST: Scan only host(s) in LIST"
echo "--channels=LIST: Scan only channel(s) in LIST"
echo "--ids=LIST: Scan only target ID(s) in LIST"
echo "--luns=LIST: Scan only lun(s) in LIST"
echo "--sync/nosync: Issue a sync / no sync [default: sync if remove]"
echo "--attachpq3: Tell kernel to attach sg to LUN 0 that reports PQ=3"
echo "--reportlun2: Tell kernel to try REPORT_LUN even on SCSI2 devices"
echo "--largelun: Tell kernel to support LUNs > 7 even on SCSI2 devs"
echo "--sparselun: Tell kernel to support sparse LUN numbering"
echo "--update: same as -u"
echo "--resize: same as -s"
echo "--ignore-rev: Ignore the revision change"
echo " Host numbers may thus be specified either directly on cmd line (deprecated) or"
echo " or with the --hosts=LIST parameter (recommended)."
echo "LIST: A[-B][,C[-D]]... is a comma separated list of single values and ranges"
echo " (No spaces allowed.)"
exit 0
fi
if test ! -d /sys/class/scsi_host/ -a ! -d /proc/scsi/; then
echo "Error: SCSI subsystem not active"
exit 1
fi
# Make sure sg is there
modprobe sg &>/dev/null
if test -x /usr/bin/sg_inq; then
sg_version=$(sg_inq -V 2>&1 | cut -d " " -f 3)
if test -n "$sg_version"; then
sg_ver_maj=${sg_version:0:1}
sg_version=${sg_version##?.}
let sg_version+=$((100*$sg_ver_maj))
fi
sg_version=${sg_version##0.}
#echo "\"$sg_version\""
if [ -z "$sg_version" -o "$sg_version" -lt 70 ] ; then
sg_len_arg="-36"
else
sg_len_arg="--len=36"
fi
else
echo "WARN: /usr/bin/sg_inq not present -- please install sg3_utils"
echo " or rescan-scsi-bus.sh might not fully work."
fi
# defaults
unsetcolor
debug=0
lunsearch=
opt_idsearch=`seq 0 7`
filter_ids=0
opt_channelsearch=
remove=
updated=0
update=0
resize=0
forceremove=
optscan=1
sync=1
existing_targets=1
mp_enable=
declare -i scan_flags=0
ignore_rev=0
# Scan options
opt="$1"
while test ! -z "$opt" -a -z "${opt##-*}"; do
opt=${opt#-}
case "$opt" in
a) existing_targets=;; #Scan ALL targets when specified
d) debug=1 ;;
f) flush=1 ;;
l) lunsearch=`seq 0 7` ;;
L) lunsearch=`seq 0 $2`; shift ;;
m) mp_enable=1 ;;
w) opt_idsearch=`seq 0 15` ;;
c) opt_channelsearch="0 1" ;;
r) remove=1 ;;
s) resize=1 ;;
i) lipreset=1 ;;
u) update=1 ;;
-alltargets) existing_targets=;;
-flush) flush=1 ;;
-remove) remove=1 ;;
-forcerescan) remove=1; forcerescan=1 ;;
-forceremove) remove=1; forceremove=1 ;;
-hosts=*) arg=${opt#-hosts=}; hosts=`expandlist $arg` ;;
-channels=*) arg=${opt#-channels=};opt_channelsearch=`expandlist $arg` ;;
-ids=*) arg=${opt#-ids=}; opt_idsearch=`expandlist $arg` ; filter_ids=1;;
-luns=*) arg=${opt#-luns=}; lunsearch=`expandlist $arg` ;;
-color) setcolor ;;
-nooptscan) optscan=0 ;;
-issue-lip) lipreset=1 ;;
-sync) sync=2 ;;
-nosync) sync=0 ;;
-multipath) mp_enable=1 ;;
-attachpq3) scan_flags=$(($scan_flags|0x1000000)) ;;
-reportlun2) scan_flags=$(($scan_flags|0x20000)) ;;
-resize) resize=1;;
-largelun) scan_flags=$(($scan_flags|0x200)) ;;
-sparselun) scan_flags=$((scan_flags|0x40)) ;;
-update) update=1;;
-wide) opt_idsearch=`seq 0 15` ;;
-ignore-rev) ignore_rev=1;;
*) echo "Unknown option -$opt !" ;;
esac
shift
opt="$1"
done
if [ -z "$hosts" ] ; then
if test -d /sys/class/scsi_host; then
findhosts_26
else
findhosts
fi
fi
if [ -d /sys/class/scsi_host -a ! -w /sys/class/scsi_host ]; then
echo "You need to run scsi-rescan-bus.sh as root"
exit 2
fi
if test "$sync" = 1 -a "$remove" = 1; then sync=2; fi
if test "$sync" = 2; then echo "Syncing file systems"; sync; fi
if test -w /sys/module/scsi_mod/parameters/default_dev_flags -a $scan_flags != 0; then
OLD_SCANFLAGS=`cat /sys/module/scsi_mod/parameters/default_dev_flags`
NEW_SCANFLAGS=$(($OLD_SCANFLAGS|$scan_flags))
if test "$OLD_SCANFLAGS" != "$NEW_SCANFLAGS"; then
echo -n "Temporarily setting kernel scanning flags from "
printf "0x%08x to 0x%08x\n" $OLD_SCANFLAGS $NEW_SCANFLAGS
echo $NEW_SCANFLAGS > /sys/module/scsi_mod/parameters/default_dev_flags
else
unset OLD_SCANFLAGS
fi
fi
DMSETUP=$(which dmsetup)
[ -z "$DMSETUP" ] && flush= && mp_enable=
MULTIPATH=$(which multipath)
[ -z "$MULTIPATH" ] && flush= && mp_enable=
echo -n "Scanning SCSI subsystem for new devices"
test -z "$flush" || echo -n ", flush failed multipath devices,"
test -z "$remove" || echo -n " and remove devices that have disappeared"
echo
declare -i found=0
declare -i updated=0
declare -i rmvd=0
if [ -n "$flush" ] ; then
if [ -x $MULTIPATH ] ; then
flushmpaths 1
fi
fi
# Update existing mappings
if [ $update -eq 1 ] ; then
echo "Searching for remapped LUNs"
findremapped
# Search for resized LUNs
elif [ $resize -eq 1 ] ; then
echo "Searching for resized LUNs"
findresized
# Normal rescan mode
else
for host in $hosts; do
echo -n "Scanning host $host "
if test -e /sys/class/fc_host/host$host ; then
# It's pointless to do a target scan on FC
if test -n "$lipreset" ; then
echo 1 > /sys/class/fc_host/host$host/issue_lip 2> /dev/null;
udevadm_settle
fi
channelsearch=
idsearch=
else
channelsearch=$opt_channelsearch
idsearch=$opt_idsearch
fi
[ -n "$channelsearch" ] && echo -n "channels $channelsearch "
echo -n "for "
if [ -n "$idsearch" ] ; then
echo -n " SCSI target IDs " $idsearch
else
echo -n " all SCSI target IDs"
fi
if [ -n "$lunsearch" ] ; then
echo ", LUNs " $lunsearch
else
echo ", all LUNs"
fi
if [ -n "$existing_targets" ] ; then
searchexisting
else
dosearch
fi
done
if test -n "$OLD_SCANFLAGS"; then
echo $OLD_SCANFLAGS > /sys/module/scsi_mod/parameters/default_dev_flags
fi
fi
let rmvd_found=$rmvd+$found
if test -n "$mp_enable" -a $rmvd_found -gt 0 ; then
echo "Attempting to update multipath devices..."
if test $rmvd -gt 0 ; then
/sbin/udevadm trigger
udevadm_settle
echo "Removing multipath mappings for removed devices if all paths are now failed... "
flushmpaths 1
fi
if test $found -gt 0 ; then
/sbin/udevadm trigger
udevadm_settle
echo "Trying to discover new multipath mappings for newly discovered devices... "
$MULTIPATH | grep "create:" 2> /dev/null
fi
fi
echo "$found new or changed device(s) found. "
if test ! -z "$FOUNDDEVS" ; then
printf "$FOUNDDEVS"
fi
echo "$updated remapped or resized device(s) found. "
if test ! -z "$CHGDEVS" ; then
printf "$CHGDEVS"
fi
echo "$rmvd device(s) removed. "
if test ! -z "$RMVDDEVS" ; then
printf "$RMVDDEVS"
fi
# Local Variables:
# sh-basic-offset: 2
# End: