Your IP : 18.116.36.54
| Current Path : /lib/kdump/ |
|
|
| Current File : //lib/kdump/kdump-lib.sh |
#!/bin/sh
#
# Kdump common variables and functions
#
DEFAULT_PATH="/var/crash/"
FENCE_KDUMP_CONFIG_FILE="/etc/sysconfig/fence_kdump"
FENCE_KDUMP_SEND="/usr/libexec/fence_kdump_send"
FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled"
is_fadump_capable()
{
# Check if firmware-assisted dump is enabled
# if no, fallback to kdump check
if [ -f $FADUMP_ENABLED_SYS_NODE ]; then
rc=`cat $FADUMP_ENABLED_SYS_NODE`
[ $rc -eq 1 ] && return 0
fi
return 1
}
perror_exit() {
echo $@ >&2
exit 1
}
perror() {
echo $@ >&2
}
is_ssh_dump_target()
{
grep -q "^ssh[[:blank:]].*@" /etc/kdump.conf
}
is_nfs_dump_target()
{
grep -q "^nfs" /etc/kdump.conf || \
[[ $(get_dracut_args_fstype "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)") = nfs* ]]
}
is_raw_dump_target()
{
grep -q "^raw" /etc/kdump.conf
}
is_fs_type_nfs()
{
local _fstype=$1
[ $_fstype = "nfs" ] || [ $_fstype = "nfs4" ] && return 0
return 1
}
is_fs_dump_target()
{
egrep -q "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf
}
strip_comments()
{
echo $@ | sed -e 's/\(.*\)#.*/\1/'
}
# Read from kdump config file stripping all comments
read_strip_comments()
{
# strip heading spaces, and print any content starting with
# neither space or #, and strip everything after #
sed -n -e "s/^\s*\([^# \t][^#]\+\).*/\1/gp" $1
}
# Check if fence kdump is configured in Pacemaker cluster
is_pcs_fence_kdump()
{
# no pcs or fence_kdump_send executables installed?
type -P pcs > /dev/null || return 1
[ -x $FENCE_KDUMP_SEND ] || return 1
# fence kdump not configured?
(pcs cluster cib | grep 'type="fence_kdump"') &> /dev/null || return 1
}
# Check if fence_kdump is configured using kdump options
is_generic_fence_kdump()
{
[ -x $FENCE_KDUMP_SEND ] || return 1
grep -q "^fence_kdump_nodes" /etc/kdump.conf
}
to_dev_name() {
local dev="${1//\"/}"
case "$dev" in
UUID=*)
dev=`blkid -U "${dev#UUID=}"`
;;
LABEL=*)
dev=`blkid -L "${dev#LABEL=}"`
;;
esac
echo $dev
}
kdump_get_persistent_dev() {
local i _tmp _dev _lookup_dirs
_dev=$(udevadm info --query=name --name="$1" 2>/dev/null)
[ -z "$_dev" ] && {
perror_exit "Kernel dev name of $1 is not found."
}
if [[ $2 = "raw" ]];then
_lookup_dirs="/dev/mapper/* /dev/disk/by-id/* /dev/disk/by-path/*"
else
_lookup_dirs="/dev/mapper/* /dev/disk/by-uuid/* /dev/disk/by-id/*"
fi
for i in $_lookup_dirs; do
_tmp=$(udevadm info --query=name --name="$i" 2>/dev/null)
if [ "$_tmp" = "$_dev" ]; then
echo $i
return
fi
done
perror "WARNING: Persistent device name of $1 not found. Using $1 as dump target name"
echo $1
}
is_user_configured_dump_target()
{
return $(is_mount_in_dracut_args || is_ssh_dump_target || is_nfs_dump_target || \
is_raw_dump_target || is_fs_dump_target)
}
get_user_configured_dump_disk()
{
local _target
_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix|^raw" /etc/kdump.conf 2>/dev/null |awk '{print $2}')
[ -n "$_target" ] && echo $_target && return
_target=$(get_dracut_args_target "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)")
[ -b "$_target" ] && echo $_target
}
get_root_fs_device()
{
local _target
_target=$(findmnt -k -f -n -o SOURCE /)
[ -n "$_target" ] && echo $_target
return
}
get_save_path()
{
local _save_path=$(grep "^path" /etc/kdump.conf|awk '{print $2}')
if [ -z "$_save_path" ]; then
_save_path=$DEFAULT_PATH
fi
echo $_save_path
}
get_block_dump_target()
{
local _target _path
if is_ssh_dump_target || is_nfs_dump_target; then
return
fi
_target=$(get_user_configured_dump_disk)
[ -n "$_target" ] && echo $(to_dev_name $_target) && return
# Get block device name from local save path
_path=$(get_save_path)
_target=$(get_target_from_path $_path)
[ -b "$_target" ] && echo $(to_dev_name $_target)
}
is_dump_to_rootfs()
{
grep "^default[[:space:]]dump_to_rootfs" /etc/kdump.conf >/dev/null
}
get_default_action_target()
{
local _target
if is_dump_to_rootfs; then
# Get rootfs device name
_target=$(get_root_fs_device)
[ -b "$_target" ] && echo $(to_dev_name $_target) && return
# Then, must be nfs root
echo "nfs"
fi
}
# Get kdump targets(including root in case of dump_to_rootfs).
get_kdump_targets()
{
local _target _root
local kdump_targets
_target=$(get_block_dump_target)
if [ -n "$_target" ]; then
kdump_targets=$_target
elif is_ssh_dump_target; then
kdump_targets="ssh"
else
kdump_targets="nfs"
fi
# Add the root device if dump_to_rootfs is specified.
_root=$(get_default_action_target)
if [ -n "$_root" -a "$kdump_targets" != "$_root" ]; then
kdump_targets="$kdump_targets $_root"
fi
echo "$kdump_targets"
}
# findmnt uses the option "-v, --nofsroot" to exclusive the [/dir]
# in the SOURCE column for bind-mounts, then if $_mntpoint equals to
# $_mntpoint_nofsroot, the mountpoint is not bind mounted directory.
is_bind_mount()
{
local _mntpoint=$(findmnt $1 | tail -n 1 | awk '{print $2}')
local _mntpoint_nofsroot=$(findmnt -v $1 | tail -n 1 | awk '{print $2}')
if [[ $_mntpoint = $_mntpoint_nofsroot ]]; then
return 1
else
return 0
fi
}
# Below is just an example for mount info
# /dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var], if the
# directory is bind mounted. The former part represents the device path, rest
# part is the bind mounted directory which quotes by bracket "[]".
get_bind_mount_directory()
{
local _mntpoint=$(findmnt $1 | tail -n 1 | awk '{print $2}')
local _mntpoint_nofsroot=$(findmnt -v $1 | tail -n 1 | awk '{print $2}')
_mntpoint=${_mntpoint#*$_mntpoint_nofsroot}
_mntpoint=${_mntpoint#[}
_mntpoint=${_mntpoint%]}
echo $_mntpoint
}
get_mntpoint_from_path()
{
echo $(df $1 | tail -1 | awk '{print $NF}')
}
get_target_from_path()
{
echo $(df $1 | tail -1 | awk '{print $1}')
}
get_fs_type_from_target()
{
echo $(findmnt -k -f -n -r -o FSTYPE $1)
}
# input: device path
# output: the general mount point
# find the general mount point, not the bind mounted point in atomic
# As general system, Use the previous code
#
# ERROR and EXIT:
# the device can be umounted the general mount point, if one of the mount point is bind mounted
# For example:
# mount /dev/sda /mnt/
# mount -o bind /mnt/var /var
# umount /mnt
get_mntpoint_from_target()
{
if is_atomic; then
for _mnt in $(findmnt -k -n -r -o TARGET $1)
do
if ! is_bind_mount $_mnt; then
echo $_mnt
return
fi
done
echo "Mount $1 firstly, without the bind mode" >&2
exit 1
else
echo $(findmnt -k -f -n -r -o TARGET $1)
fi
}
# get_option_value <option_name>
# retrieves value of option defined in kdump.conf
get_option_value() {
echo $(strip_comments `grep ^$1 /etc/kdump.conf | tail -1 | cut -d\ -f2-`)
}
#This function compose a absolute path with the mount
#point and the relative $SAVE_PATH.
#target is passed in as argument, could be UUID, LABEL,
#block device or even nfs server export of the form of
#"my.server.com:/tmp/export"?
#And possibly this could be used for both default case
#as well as when dump taret is specified. When dump
#target is not specified, then $target would be null.
make_absolute_save_path()
{
local _target=$1
local _mnt
[ -n $_target ] && _mnt=$(get_mntpoint_from_target $1)
_mnt="${_mnt}/$SAVE_PATH"
# strip the duplicated "/"
echo "$_mnt" | tr -s /
}
check_save_path_fs()
{
local _path=$1
if [ ! -d $_path ]; then
perror_exit "Dump path $_path does not exist."
fi
}
is_atomic()
{
grep -q "ostree" /proc/cmdline
}
is_ipv6_address()
{
echo $1 | grep -q ":"
}
has_hpwdt()
{
cat /proc/modules | grep -q hpwdt
}
# get ip address or hostname from nfs/ssh config value
get_remote_host()
{
local _config_val=$1
# ipv6 address in kdump.conf is around with "[]",
# factor out the ipv6 address
_config_val=${_config_val#*@}
_config_val=${_config_val%:/*}
_config_val=${_config_val#[}
_config_val=${_config_val%]}
echo $_config_val
}
is_hostname()
{
local _hostname=`echo $1 | grep ":"`
if [ -n "$_hostname" ]; then
return 1
fi
echo $1 | grep -q "[a-zA-Z]"
}
# Copied from "/etc/sysconfig/network-scripts/network-functions"
get_hwaddr()
{
if [ -f "/sys/class/net/${1}/address" ]; then
awk '{ print toupper($0) }' < /sys/class/net/${1}/address
elif [ -d "/sys/class/net/${1}" ]; then
LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \
awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/,
"\\1", 1)); }'
fi
}
get_ifcfg_by_device()
{
grep -E -i -l "^[[:space:]]*DEVICE=\"*${1}\"*[[:space:]]*$" \
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}
get_ifcfg_by_hwaddr()
{
grep -E -i -l "^[[:space:]]*HWADDR=\"*${1}\"*[[:space:]]*$" \
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}
get_ifcfg_by_uuid()
{
grep -E -i -l "^[[:space:]]*UUID=\"*${1}\"*[[:space:]]*$" \
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}
get_ifcfg_by_name()
{
grep -E -i -l "^[[:space:]]*NAME=\"*${1}\"*[[:space:]]*$" \
/etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}
is_nm_running()
{
[ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]
}
is_nm_handling()
{
LANG=C nmcli -t --fields device,state dev status 2>/dev/null \
| grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$"
}
# $1: netdev name
get_ifcfg_nmcli()
{
local nm_uuid nm_name
local ifcfg_file
# Get the active nmcli config name of $1
if is_nm_running && is_nm_handling "${1}" ; then
# The configuration "uuid" and "name" generated by nm is wrote to
# the ifcfg file as "UUID=<nm_uuid>" and "NAME=<nm_name>".
nm_uuid=$(LANG=C nmcli -t --fields uuid,device c show --active 2>/dev/null \
| grep "${1}" | head -1 | cut -d':' -f1)
nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2>/dev/null \
| grep "${1}" | head -1 | cut -d':' -f1)
ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}")
[ -z "${ifcfg_file}" ] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}")
fi
echo -n "${ifcfg_file}"
}
# $1: netdev name
get_ifcfg_legacy()
{
local ifcfg_file
ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}"
[ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
ifcfg_file=$(get_ifcfg_by_name "${1}")
[ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
local hwaddr=$(get_hwaddr "${1}")
if [ -n "$hwaddr" ]; then
ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}")
[ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
fi
ifcfg_file=$(get_ifcfg_by_device "${1}")
echo -n "${ifcfg_file}"
}
# $1: netdev name
# Return the ifcfg file whole name(including the path) of $1 if any.
get_ifcfg_filename() {
local ifcfg_file
ifcfg_file=$(get_ifcfg_nmcli "${1}")
if [ -z "${ifcfg_file}" ]; then
ifcfg_file=$(get_ifcfg_legacy "${1}")
fi
echo -n "${ifcfg_file}"
}
# returns 0 when omission of watchdog module is desired in dracut_args
# returns 1 otherwise
is_wdt_mod_omitted() {
local dracut_args
local ret=1
dracut_args=$(grep "^dracut_args" /etc/kdump.conf)
[[ -z $dracut_args ]] && return $ret
eval set -- $dracut_args
while :; do
[[ -z $1 ]] && break
case $1 in
-o|--omit)
echo $2 | grep -qw "watchdog"
[[ $? == 0 ]] && ret=0
break
esac
shift
done
return $ret
}
# If "dracut_args" contains "--mount" information, use it
# directly without any check(users are expected to ensure
# its correctness).
is_mount_in_dracut_args()
{
grep -q "^dracut_args .*\-\-mount" /etc/kdump.conf
}
# If $1 contains dracut_args "--mount", return <filesystem type>
get_dracut_args_fstype()
{
echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f3
}
# If $1 contains dracut_args "--mount", return <device>
get_dracut_args_target()
{
echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f1
}
# get_maj_min <device>
# Prints the major and minor of a device node.
# Example:
# $ get_maj_min /dev/sda2
# 8:2
get_maj_min() {
local _maj _min _majmin
_majmin="$(stat -L -c '%t:%T' "$1" 2>/dev/null)"
printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))"
}
# Not every device in /dev/mapper should be examined.
# If it is an LVM device, touch only devices which have /dev/VG/LV symlink.
lvm_internal_dev() {
local dev_dm_dir=/sys/dev/block/$1/dm
[[ ! -f $dev_dm_dir/uuid || $(<$dev_dm_dir/uuid) != LVM-* ]] && return 1 # Not an LVM device
local DM_VG_NAME DM_LV_NAME DM_LV_LAYER
eval $(dmsetup splitname --nameprefixes --noheadings --rows "$(<$dev_dm_dir/name)" 2>/dev/null)
[[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 0 # Better skip this!
[[ ${DM_LV_LAYER} ]] || [[ ! -L /dev/${DM_VG_NAME}/${DM_LV_NAME} ]]
}
check_vol_slaves_all() {
local _lv _vg _pv _majmin
_majmin="$2"
_lv="/dev/block/$_majmin"
_dm="/sys/dev/block/$_majmin/dm"
[[ -f $_dm/uuid && $(<$_dm/uuid) =~ LVM-* ]] || return 1
_vg=$(dmsetup splitname --noheadings -o vg_name $(<"$_dm/name") )
# strip space
_vg="${_vg//[[:space:]]/}"
if [[ $_vg ]]; then
for _pv in $(lvm vgs --noheadings -o pv_name "$_vg" 2>/dev/null)
do
check_block_and_slaves_all $1 $(get_maj_min $_pv)
done
return 0
fi
return 1
}
check_block_and_slaves_all() {
local _x _ret=1
[[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
if ! lvm_internal_dev $2 && "$1" $2; then
_ret=0
fi
check_vol_slaves_all "$@" && return 0
if [[ -f /sys/dev/block/$2/../dev ]] && [[ /sys/dev/block/$2/../subsystem -ef /sys/class/block ]]; then
check_block_and_slaves_all $1 $(<"/sys/dev/block/$2/../dev") && _ret=0
fi
[[ -d /sys/dev/block/$2/slaves ]] || return 1
for _x in /sys/dev/block/$2/slaves/*; do
[[ -f $_x/dev ]] || continue
[[ $_x/subsystem -ef /sys/class/block ]] || continue
check_block_and_slaves_all $1 $(<"$_x/dev") && _ret=0
done
return $_ret
}